Free Online Directory General Lab Techniques MCQs - MCQs Answers

General Lab Techniques MCQs

1. Which of the following is NOT a basic safety precaution in the laboratory?

A) Wearing appropriate personal protective equipment

B) Eating and drinking in the lab

C) Understanding emergency procedures

D) Properly labeling chemicals and samples

Answer: B) Eating and drinking in the lab

2. What is the purpose of a fume hood in a laboratory?

A) To store chemicals

B) To dispose of waste

C) To provide ventilation for hazardous fumes

D) To sterilize equipment

Answer: C) To provide ventilation for hazardous fumes

3. Which type of glassware is typically used for precise volume measurements?

A) Beaker

B) Test tube

C) Graduated cylinder

D) Erlenmeyer flask

Answer: C) Graduated cylinder

4. What does the acronym MSDS stand for in laboratory safety?

A) Material Safety Data Sheet

B) Medical Safety Data Sheet

C) Lab Equipment Data Sheet

D) Material Storage Data Sheet

Answer: A) Material Safety Data Sheet

5. Which instrument is used to measure the mass of an object?

A) Thermometer

B) Balance

C) Pipette

D) Spectrophotometer

Answer: B) Balance

6. What does the term “aseptic technique” refer to in the lab?

A) Keeping the lab clean

B) Sterilizing equipment

C) Handling materials in a way that prevents contamination

D) Using precise measurements

Answer: C) Handling materials in a way that prevents contamination

7. What is the purpose of a centrifuge in a laboratory?

A) To measure pH

B) To mix solutions

C) To separate components based on density

D) To measure volume

Answer: C) To separate components based on density

8. What is the function of a Bunsen burner in a laboratory?

A) To measure temperature

B) To sterilize equipment

C) To provide a flame for heating

D) To measure pH

Answer: C) To provide a flame for heating

9. Which type of pipette is designed for measuring and transferring small volumes of liquids?

A) Volumetric pipette

B) Serological pipette

C) Micropipette

D) Mohr pipette

Answer: C) Micropipette

10. What is the purpose of calibration in laboratory instruments?

A) To sterilize the instrument

B) To adjust the instrument to a standard reference

C) To clean the instrument

D) To measure volume

Answer: B) To adjust the instrument to a standard reference

11. Which of the following is NOT a component of a microscope?

A) Eyepiece

B) Objective lens

C) Stage

D) Pipette

Answer: D) Pipette

12. What does the acronym ELISA stand for in laboratory testing?

A) Enzyme-Linked Inflammation System Analysis

B) Enzyme-Linked Immunoblotting Assay

C) Enzyme-Linked Immunosorbent Assay

D) Enzyme-Linked Isolation Sequence Analysis

Answer: C) Enzyme-Linked Immunosorbent Assay

13. What is the purpose of agarose gel electrophoresis in the lab?

A) To measure pH

B) To separate DNA fragments based on size

C) To sterilize equipment

D) To measure volume

Answer: B) To separate DNA fragments based on size

14. Which of the following is used to measure the pH of a solution?

A) Thermometer

B) pH meter

C) Spectrophotometer

D) Balance

Answer: B) pH meter

15. What does the term “incubation” refer to in laboratory procedures?

A) Storing samples at a controlled temperature

B) Mixing solutions

C) Measuring volume

D) Sterilizing equipment

Answer: A) Storing samples at a controlled temperature

16. Which of the following is NOT a step in the scientific method?

A) Hypothesis

B) Conclusion

C) Observation

D) Repetition

Answer: D) Repetition

17. What is the purpose of a spectrophotometer in the lab?

A) To measure temperature

B) To measure pH

C) To analyze the concentration of a substance in a solution

D) To sterilize equipment

Answer: C) To analyze the concentration of a substance in a solution

18. Which of the following is NOT a common laboratory solvent?

A) Water

B) Ethanol

C) Chloroform

D) Salt

Answer: D) Salt

19. What is the purpose of a hot plate in the laboratory?

A) To measure temperature

B) To sterilize equipment

C) To provide heat for reactions

D) To measure pH

Answer: C) To provide heat for reactions

20. What does the acronym PCR stand for in molecular biology?

A) Polymerase Chain Reaction

B) Protein Concentration Regulation

C) Plasmid Cleavage Reaction

D) Protein Chromatography Resolution

Answer: A) Polymerase Chain Reaction

21. Which of the following is used to measure absorbance in a spectrophotometer?

A) Fluorescence

B) Light intensity

C) Voltage

D) Resistance

Answer: B) Light intensity

22. What is the function of a magnetic stirrer in the laboratory?

A) To measure temperature

B) To mix solutions using a magnetic field

C) To measure pH

D) To sterilize equipment

Answer: B) To mix solutions using a magnetic field

23. What does the term “titration” refer to in laboratory experiments?

A) Measuring temperature

B) Mixing solutions

C) Determining the concentration of a substance in a solution

D) Sterilizing equipment

Answer: C) Determining the concentration of a substance in a solution

24. Which of the following is NOT a type of chromatography technique?

A) Gas chromatography

B) Liquid chromatography

C) Column chromatography

D) Magnetic chromatography

Answer: D) Magnetic chromatography

25. What does the acronym HPLC stand for in analytical chemistry?

A) High-Performance Liquid Chromatography

B) High-Pressure Liquid Concentration

C) High-Precision Laboratory Calibration

D) High-Potential Liquid Chemicals

Answer: A) High-Performance Liquid Chromatography

26. Which of the following is NOT a type of microscope?

A) Electron microscope

B) Light microscope

C) Scanning probe microscope

D) Thermometer microscope

Answer: D) Thermometer microscope

27. What is the primary purpose of a desiccator in a laboratory?

A) To store biological samples

B) To measure temperature

C) To maintain a dry environment for storing hygroscopic materials

D) To sterilize equipment

Answer: C) To maintain a dry environment for storing hygroscopic materials

28. What does the term “centrifugation” refer to in laboratory procedures?

A) Heating samples to a high temperature

B) Separating components of a mixture based on density using centrifugal force

C) Measuring the pH of a solution

D) Mixing solutions using a centrifuge

Answer: B) Separating components of a mixture based on density using centrifugal force

29. Which of the following is NOT a type of biological safety cabinet?

A) Class I

B) Class II

C) Class III

D) Class IV

Answer: D) Class IV

30. What is the function of an autoclave in a laboratory?

A) To measure temperature

B) To sterilize equipment using steam under pressure

C) To measure pH

D) To mix solutions

Answer: B) To sterilize equipment using steam under pressure

31. Which type of pipette is designed for delivering a fixed volume of liquid?

A) Volumetric pipette

B) Serological pipette

C) Mohr pipette

D) Pasteur pipette

Answer: A) Volumetric pipette

32. What does the acronym SOP stand for in laboratory protocols?

A) Standard Operating Procedure

B) Safety Observation Protocol

C) Scientific Observation Procedure

D) Sample Observation Protocol

Answer: A) Standard Operating Procedure

33. Which of the following is NOT a common method of sterilizing laboratory equipment?

A) Autoclaving

B) Filtration

C) Boiling in water

D) Exposure to ultraviolet (UV) light

Answer: C) Boiling in water

34. What is the purpose of a water bath in the laboratory?

A) To measure temperature

B) To sterilize equipment

C) To provide a controlled temperature environment for samples

D) To measure pH

Answer: C) To provide a controlled temperature environment for samples

35. What does the term “pipetting” refer to in laboratory procedures?

A) Measuring temperature

B) Transferring liquids using a pipette

C) Measuring pH

D) Sterilizing equipment

Answer: B) Transferring liquids using a pipette

36. Which of the following is NOT a common hazard in the laboratory?

A) Chemical spills

B) Electric shock

C) Loud noises

D) Excessive humidity

Answer: D) Excessive humidity

37. What is the function of a reagent in a laboratory experiment?

A) To measure pH

B) To provide a specific chemical reaction

C) To mix solutions

D) To measure temperature

Answer: B) To provide a specific chemical reaction

38. Which of the following is NOT a type of laboratory glassware?

A) Beaker

B) Test tube

C) Centrifuge

D) Flask

Answer: C) Centrifuge

39. What does the acronym TLC stand for in chromatography?

A) Thin-Layer Chromatography

B) Total Liquid Chromatography

C) Temperature-Limited Chromatography

D) Testable Liquid Chromatography

Answer: A) Thin-Layer Chromatography

40. What is the purpose of a biosafety cabinet?

A) To protect the environment from harmful biological agents

B) To sterilize equipment

C) To measure pH

D) To provide a controlled temperature environment

Answer: A) To protect the environment from harmful biological agents

BioTechnology MCQs

  1. Microbial Techniques MCQs
  2. Molecular Biology Techniques MCQs
  3. General Lab Techniques MCQs
  4. Laboratory Techniques MCQs
  5. Biotechnology Regulations and Compliance MCQs
  6. Bioethics MCQs
  7. Ethics and Professional Practice MCQs
  8. Data Analysis MCQs
  9. Introduction to Programming MCQs
  10. Computer Science: MCQs
  11. Statistics MCQs
  12. Calculus MCQs
  13. Mathematics: MCQs
  14. Nanobiotechnology MCQs
  15. Pharmaceutical Biotechnology MCQs
  16. Environmental Biotechnology MCQs
  17. Bioprocess Engineering MCQs
  18. Industrial Biotechnology MCQs
  19. Animal Biotechnology MCQs
  20. Plant Biotechnology MCQs
  21. Immunology MCQs
  22. Genetic Engineering MCQs
  23. Bioinformatics MCQs
  24. Molecular Biology MCQs
  25. Introduction to Biotechnology MCQs
  26. Physics for Life Sciences MCQs
  27. Physics MCQs
  28. Organic Chemistry MCQs
  29. Chemistry MCQs
  30. Microbiology MCQs
  31. Genetics MCQs
  32. Cell Biology MCQs
  33. General Biology MCQs
  34. Knowledge management systems MCQs
  35. Communities of practice MCQs
  36. Organizational learning MCQs
  37.  Knowledge Manageme MCQs
  38.  Digital rights management MCQs
  39.  User experience (UX) design MCQs
  40.  Digital preservation MCQs
  41. Digital library design and architecture MCQs
  42. Digital Libraries MCQs
  43.  Information policy MCQs
  44.  Copyright and intellectual property issues MCQs
  45. Intellectual freedom MCQs
  46.  Library legislation and policy MCQs
  47.  Library Advocacy and Policy MCQs
  48. Educational technologies MCQs
  49. Literacy development MCQs
  50. Programming for youth
  51. Children’s literature MCQs
  52.  Children’s and Young Adult Services MCQs
  53.  Research data management MCQs
  54. Institutional repositories MCQs
  55. Scholarly communication MCQs
  56. Information literacy programs
  57.  Public relations and community engagement MCQs
  58.  Community needs assessment MCQs
  59.  Public Libraries MCQs
  60. Medical libraries MCQs
  61.  Corporate libraries MCQs
  62. Special Libraries and Information Centers MCQs
  63. Archival preservation MCQs
  64. Digital curation MCQs
  65. Records management MCQs
  66. Archival theory and practice MCQs
  67. Archival Studies MCQs
  68. Marketing and advocacy MCQs
  69. Financial management and budgeting MCQs
  70. Human resource management MCQs
  71. Strategic planning MCQs
  72. Management and Leadership in Libraries MCQs

Leave a Comment

All copyrights Reserved by MCQsAnswers.com - Powered By T4Tutorials